Guides

ISUP Cause Code 16 and the Meaning of Normal Call ReleaseIn Signaling System No. 7, an ISUP Release message explains why a circuit-switched call is being cleared. Cause code 16 indicates that the call ended normally.…
Troubleshooting SS7 Route Outages With MTP3 MessagesAn SS7 route outage can look like a failed call, delayed SMS, missing roaming service, or an unreachable signaling point. The visible symptom usually appears…
MTP3 User Part Masking for Selective Message DiscardMTP3 user part masking provides a controlled way to discard selected signaling messages before they reach higher-layer applications. Instead of treating every…
Using Pseudo-Numbers for Private Network-to-Network InterworkingPrivate telecom networks often need to exchange calls, messages, and signaling information without exposing their internal numbering plans. A pseudo-number…
SS7 Nyquist Concepts and Signaling Link Capacity CalculationsSS7 capacity planning combines digital sampling theory, signaling traffic analysis, and link engineering. The Nyquist theorem explains how voice information is…
Call Routing with ISUP Redirecting and Original Called NumbersISUP call routing is often described as a sequence of digit analysis, translation, and trunk selection. That description is accurate, but it misses an…
SIGTRAN M2PA Link State Management And Failover EventsM2PA transports SS7 MTP3 signaling across an IP network by using SCTP associations between signaling peers. It preserves important MTP2 functions, including…
ANSI And ITU SS7 Network Topology DifferencesSignaling System No. 7 networks use structured relationships between signaling points, signal transfer points, and service control points. Although ANSI and…
TCAP Response Timeouts and Service LatencyTransaction Capabilities Application Part (TCAP) supports signaling exchanges that sit behind many telecom services, including mobility management, number…
How SS7 Enables Advanced Intelligent Network ServicesAdvanced Intelligent Network (AIN) services separate call logic from the basic switching process. This allows a telecommunications provider to introduce…